Taylormade Stealth Gloire Irons 6-PW ( 5pcs )
- Add Your Review (100 Points)
-
Share on Social Media (5/10/50/100 Points)
-NOTE: PRE-ORDER ( OFFICIAL RELEASE DATE: OCTOBER 7, 2022 ) -
Introducing Taylormade Stealth Gloire Iron, the newest Gloire series, Gloire series has pursued "flying, gentleness and beauty" since the first series was released in 2012.
FEATURE
DRAW YOUR NEXT LEVEL
Adopts a draw bias design with a "cap back" design and a wide sole shape. Stealth with fast muzzle velocity, gentle hits, and high trajectory Take his irons to the next level with his irons.
FAST, LIGHT, EASY
Stealth Gloire irons are designed to be fast, easy to hit, and have a high trajectory. From the shaft to the grip to the head structure, we have adopted a design that pursues weight reduction and forgiveness.
PRECISE CENTER OF GRAVITY DESIGN
"Tow Wrap Technology" removes the metal on the toe side to gain excess weight. In addition, the "fluted hosel" also gains excess weight, which is replaced with "tungsten weight" inside the head to achieve a lower center of gravity and greater forgiveness.
GENTLY HIGH TRAJECTORY
The "cap back design" using tow wrap technology realizes a low center of gravity design. In addition, by adopting a design that allows you to hit a high trajectory easily, it is possible to attack the target with a carry.
TECHNOLOGY
"Cap Back Design" & "Tow Wrap Technology" - By removing the metal on the toe side and adopting "Tow Wrap Technology" that optimally distributes the excess weight, TM has achieved a design with a lower center of gravity. A head structure with a lower center of gravity has created an iron that combines excellent "flying distance", "forgiveness" and "feel".
Chromoly steel L type forged face (#5-#9) - The "L-type chrome molybdenum steel (4140) forged face", which has a thin face thickness to the bottom of the face, contributes to increasing the initial velocity of the ball. In addition, it is equipped with organic ICT (inverted cone technology) that enables the design of the sweet area according to count. While combining appropriate ball speed and high tolerance, it faithfully demonstrates the flight distance performance required for each club.
"Shape" and "performance" in pursuit of tolerance -Tow Wrap technology replaces excess weight with "tungsten weight" inside the head to achieve a lower center of gravity and greater forgiveness. The wide sole shape allows you to swing as you wish, not only on the fairway but also on shots from the rough. Equipped with a shape and performance that any golfer can play easily and gently.
Penetrating speed pocket - TaylorMade's unique penetrating speed pocket contributes to maintaining the ball's initial velocity by suppressing unnecessary spin even on mis-hits at the bottom of the face.
SPECIFICATION
HEAD | #5 | #6 | #7 | #8 | #9 | PWs | AW | SW | |
---|---|---|---|---|---|---|---|---|---|
Head material / face material (manufacturing method) | Soft iron [8620] (casting) + built-in tungsten weight / Chromoly steel [4140] (forging) | Stainless Steel [431SS] (Casting) | |||||||
Loft angle (°) | 21 | 24 | 27 | 31 | 36 | 41 | 47 | 54 | |
Lie angle (°) | 61 | 61.5 | 62 | 62.5 | 63 | 63.5 | 63.5 | 63.5 | |
Length (inch) | FUJIKURA SPEEDER NX for TM | 38.5 | 37.875 | 37.25 | 36.75 | 36.25 | 35.75 | 35.5 | 35.25 |
NSPRO® 790GH | 38.5 | 37.875 | 37.25 | 36.75 | 36.25 | 35.75 | 35.5 | 35.25 | |
NSPRO® 950GH neo | 38.5 | 37.875 | 37.25 | 36.75 | 36.25 | 35.75 | 35.5 | 35.25 | |
balance | FUJIKURA SPEEDER NX for TM | D0 | D1 | D2 | |||||
NSPRO® 790GH | D1 | D2 | D3 | ||||||
NSPRO® 950GH neo | D2 | D3 | D4 | ||||||
club weight | FUJIKURA SPEEDER NX for TM | [#7] Approx.358g (SR) / Approx.353g (R) | |||||||
NSPRO® 790GH | [#7] About 382g (S) | ||||||||
NSPRO® 950GH neo | [#7] About 403g (S) | ||||||||
grip | Lamkin ST BK / WH CP (diameter 60X / 42g) calibrated (backline) Yes |
SHAFT | FLEX | count/set | |||
---|---|---|---|---|---|
#5 | #6-PW | AW | SW | ||
FUJIKURA SPEEDER NX for TM | SR | ● | ● | ● | ● |
R. | ● | ● | ● | ● | |
NSPRO® 790GH | S. | ● | ● | ● | ● |
NSPRO® 950GH neo | S. | ● | ● | ● | ● |
● indicates development in the finished product club and the custom-made club.
△ is for custom-made clubs.
SHAFT | flex | Shaft weight (g) | torque | kick point |
---|---|---|---|---|
FUJIKURA SPEEDER NX for TM | SR | about 56 | 4.1 | first middle |
R. | about 52 | 4.2 | first middle | |
NSPRO® 790GH | S. | about 85 | 2.8 | first middle |
NSPRO® 950GH neo | S. | 98 | 1.7 | During ~ |
Login To Tourspecgolf
Create An Account